50x Set Hydroponic Endcaps Choose Your Pair (Vinyl Downspout Endcaps 3X4)

  

You would get 100 endcaps, order this and message me what combination you want. Upgrade your home garden or indoor farming project with our 3x4 diy hydroponic system end caps. These high-quality pla end caps are designed to fit seamlessly with your hydroponic system, ensuring a secure, leak-free connection for optimal plant growth.

Easy to install and maintain, our end caps are perfect for beginners and experienced gardeners alike. Shop now and discover the benefits of a thriving hydroponic garden. Each order comes with 2 ends of your choice. Either 2 closed ends, 2 tubed 1/2 pvc pipe adapter ends, or 1 of each. These endcaps are designed for the 3x4 in.

Amerimax commercial vinyl downspout (link at bottom) found is most hardware stores in canada and the us i also sell the 2x3 version. You can create your own hydroponics grow system at home with a small start up cost. There are many downspout tutorials on youtube to follow and you will need more than just these endcaps.

These endcaps slot on the end and you can design your own configuration depending on how many channels you want. The endcaps with the 1/2 pvc pipe adapter works better than the bottom bulkheads because they don't get choked out by the root system near as fast. The caps were designed by me for tight tolerance on the downspout they are a little hard to get on but they will fit. Step 1: cut your downspout into the length you would like for your system.

They come in 10 ft sections so most people with the room either keep them 10ft or in half to make 5ft sections. Step 2: dry fit all pieces together in the configuration you want before glueing.

Step 3: apply a bead of silicone around the end of the downspout and fit your end cap to it do not use tools to force it you should be able to get it on with just your own hands. The best way to to get one corner in first and work your way around without binding it to much. Same process for the 1/2 pvc adapter endcaps. Apply silicone to the 1/2 pipe and let dry. Step 4: let the silicone dry for 24 hours before introducing water.

Vinyl downspout and the silicon not included. These are made to order i keep a small stock on hand but may need a few days to print your order. Turn around time may be 3 - 5 days. This item is made of pla.