60 cup 3D Printed White Hydroponic Tower Complete Kit

  

First image is the actual item. Fully assembled the tower is 61" tall and 24" diameter.

(not including light kit wires) 3d printed parts are made from petg (think pop bottles) and the bucket is food grade hdpe. Includes dedicated lighted sprouting station to prepare your next set of seedlings. The tower light kit is 252w total (6 x 42w). The sprout lights are 20w total (2 x 10w) you can order with or without the tower lighting kit. This kit will include the following to get you growing.

Tsc branded 5 gallon bucket. Three timers--can be set in increments of 15 minutes--one for lights, one for the pump, one for the sprout station. 1 greenhouse for seed propagation (various colors). 1oz of fox farm grow big liquid nutrients 6-4-4.

This is a starter sample only you will need additional nutrients of your choice for long term use. 10ml pipette for dispensing nutrients. If you order on your own link is below. Easy to follow instructions included. Not included are seeds and water.

If you're unfamiliar with 3d printing here is a quick overview. The 3d printers used for these towers are fff, fused filament fabrication. A small layer of plastic is printed at a time building the model from the base up using a roll of pre-colored filament. Due to this process, there may be slight surface or color irregularities. White/natural filament may vary in color.

You'll also see the print lines and seams. Following the printing process models are cleared from any support structures needed and wiped clean. The towers are printed using petg resin which is not dishwasher safe, but can be washed using regular dish soap and luke warm water. Excessively hot temperatures may cause warping which could cause improper component fit.

This item is made of petg and hdpe.