4 - 2700k samsung lm561c 96 led strips. 2 - 6500k samsung lm561c 96 led strips. 6 - 40mm x 450mm heatsinks (40mmx860mm 2 strip heatsinks optional). 2 - pcs 1/2" 18ga aluminum angle in 18", 24", or 32" (custom sizes optional). 30mm double sided thermal tape pre-applied to boards.Meanwell hlg-185h-c1400b w/wago connectors for power and led hookup. 3 ft power cord for driver(6-footer available).
Optional pre-wired dimmer switch available. 5 feet of solid core 18ga wire to hook strips up. Assorted screws(to build frame). Dual connectors(easier to wire in series and/or parallel). This listing is for 6 of these strips with heatsinks to mount them on, aluminum angle(2 each of 18", 24", or 32 length) to build a frame with and everything you need to get them growing, including a meanwell hlg-185h-c1400b, power cable for driver and we even offer the option of a prewired dimmer for the driver.We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus you gain the benefit of transferring the heat to the heatsink much better. All you will need is a drill and 1/8 bit and a good phillips screwdriver. These are 30mmx400mm (approximately 1.2 inch x 16 inches) 96 diode strips using the samsung lm561c s6 bin diodes. You get 6 of the 40mm x 450mm heatsinks. These make it so easy to build a frame for your light as well as keep your strips cooler, thus increasing the efficiency and the life of your strips. These are not quantum brand boards. These do use the same true samsung lm561c leds and these also have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series. For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips. This listing is for 4 of the 2700k(recommended for blooming) strips and two of the 6500k(recommended for vegetation). Mixing these spectrums 2:1 like this covers a broader spectrum than can be achieved with any one color. They are rated at 24v and 1400-1800ma per strip and can handle a little more, but are much more efficient in the 1400ma range. There are many other configurations that work(too many for me to list), but just ask and i can recommend a custom kit for you and i will answer any questions you have. Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know.