BLACK DIY Vertical Hydroponics Aquaponics Grow Tower 3D Printed Parts Kit

  

This is a diy kit. Only thing provided is the 3d printed parts. These are 3d printed parts to make a diy hydroponics grow tower out of a 4 inch water pipe and 5 gallon bucket.

30 net cup collars (30 black). 30 clear net cups (non-3d printed). 3 1ft threaded rods + 6 nuts and washers (they need to fit togehter). Small fountain pump (200gph to 300gph with adjustment)(i found mine on amazon).

3 small stainless screws (for diverter). 5ft 4 pipe (hardware store, usualy come in 10ft sections). 4 pipe cap (hardware store). Grow media (rockwool, clay pellets, foam pods). Sillicone (aquarium grade if you use fish). Drill bit same size as threaded rod. These are 3d printed parts, some cosmetic imperfection might be visible but they will not affect its functionality. This item is made of pla and plastic.