Diy Partial Octagon Spider Bracket Linear Octagon Gazebo Pavillion Patio Covering Poolside Hottub Grill Bar Park Venue

  
This diy partial octagon 5-way spider bracket creates a perfect 5-way rafters joints at the peak of the partial octagon roof and linear octagon roof peaks. It makes 4-12 pitched roof surfaces. This octagon 5-way spider bracket simplifies roof construction work and yields a super-strong roof structure which can withstand snow loads exceeding 165 lbs. This strong roofed structure will be a permanent structure for any geographic location. The octagon 5-way steel bracket eliminates all wood joinery skills and work making it ideal for all diy projects and for contractors. Made of 1/8 thick steel, welded structure coated with powder paint for permanent rust proofing and durability.

The octagon spider bracket includes. Qty 1, of roof peak partial octagon 5-way spider bracket. Qty 25, of 1/4" x 1-1/2" lag screws. Roof rafters' pitch angle is fixed at 20-degrees.

Roof rafters and cross-tie beam lumber to be kiln dried lumber pine, cedar, redwood, etc. Roof rafters' size to be 2x6 for widths up to 14 feet and 2x8 for widths more than 14 feet. Cross-tie support beams are required every 24 between adjacent rafters to support roof deck plywood/osb boards. This bracket is constructed from 1/8 thick high strength steel. This bracket is laser cut, formed, welded, and coated with durable black powder paint.

This bracket may be spray painted over with any desired exterior-grade paint color.