Large Laminar Flow Hood 420x330mm 16.5 x13 Perfect for grain bags Jars and agar transfers

  

I've received numerous inquiries regarding working with grain bags, and in the past, my go-to solution was to elevate one of our smaller hoods using books to reach the desired height. However, with our new flow hood, this is no longer necessary. It can be rotated to accommodate the increased height while still providing the necessary draft shield. Professionally designed and manufactured in one piece.

Made out of chemical resistant petg. The use of isopropyl alcohol and other cleaning agents are not an issue.

Washable fan pre filter to extend the life of the hepa filter. Deeper acrylic shield to keep the nasties out. Optional built in speed controller. Optional rack, raise your samples 75mm to ensure cleanest airflow. Power supply is over speced and meets international safety standards.

When to change your filter. It is recommended that the filter must be changed when the colour changes from white to grey / dark grey. The dimensions assembled are 430x345x248 - wxhxd. There may be minor cosmetic defects. This is an original design, and while there almost 1 to 1 copies out there now with less features and an inferior plastic. Supporting original creators is important to keep innovation happening. This item is made of petg.