Greenhouses & Hydroponics

Mushroom Heating and Incubation Chamber Growbuddie40

Mushroom Heating and Incubation Chamber Growbuddie40
Mushroom Heating and Incubation Chamber Growbuddie40
Mushroom Heating and Incubation Chamber Growbuddie40
Mushroom Heating and Incubation Chamber Growbuddie40

Mushroom Heating and Incubation Chamber Growbuddie40    Mushroom Heating and Incubation Chamber Growbuddie40

Mushroom incubator & fruiting box - growbuddie40 (full digital display). The growbuddie40 is a compact, all-in-one mushroom incubator and fruiting chamber, perfect for indoor mushroom cultivation, mycology research, and home-based mushroom farming.

Housed within a double-skinned, stress-resistant storage box, it features our system simple plug & play digital thermostat, ensuring precise temperature control for optimal mycelium colonization and fruiting conditions. We listened to your feedback many growers wanted a smaller version of the growbuddie60, and the growbuddie40 is the perfect solution.

Specifically designed to accommodate 4lb substrate bags, it makes monotub fruiting easy and efficient. Simply colonize the substrate bag inside the growbuddie40, then transfer the contents into your monotub to begin fruiting. The 50/50 rye grain and hpoo mix is perfectly suited for this size tub, ensuring strong yields and efficient colonization. Dimensions: 41cm (l) x 31cm (w) x 28cm (h). Heating element: 7w heat mat.

Temperature control: digital thermostat (pre-set to maintain 26-27c). Power supply: uk 3-pin plug (3a).

Heat mat & wiring isolation: the double-skinned construction keeps the heat mat and wiring dry and protected for enhanced safety. Pre-positioned temperature probe: securely placed inside the base void, eliminating system failure risks. Vent holes can be covered with micropore tape or breathable filter material to regulate airflow. Melted holes for durabilitystronger and less prone to cracking than drilled holes. Improves heat retention, directing warmth upwards for maximum efficiency.

Just remove the uk plug cover, connect your incubator, and start growingno complex setup required. Perfect for incubation & fruiting.

Liquid culture jars: 12 x 500ml or 6 x 1000ml. Mycotubs: 9 x 1200ml grain tubs (stacked three high). Mycopots: 12 x 510ml jars or 6 x 1000ml jars.

Inject & forget bags: 2 x 2lb bags or 3 x 1lb bags. Brown rice flour & grain bags: 9 x 1lb bags.

Mycotubs: 3 x 1200ml tubs. Mycopots: 4 x 500-800ml pots.

4lb substrate cake (from an inject & forget bag). Monotub: 1 x 4lb 50/50 rye grain & hpoo substrate. The growbuddie40 is designed for maximum space efficiency. Each unit supports up to 20kg in vertical weight.

Safely stack up to 6 units high while keeping the total height under 170cm. Heat naturally rises, reducing the need for additional heating in upper units. This stackable system allows for efficient use of space, making it ideal for hobbyists and advanced mycologists alike.

How to reset the thermostat. The thermostat is preset to maintain a temperature of 26-27c. Set the on temperature (26c).

Hold down the left arrow for 3 seconds (until flashing). Use the up/down arrows to set 26c.

Wait 5 seconds for it to set. Set the off temperature (27c).

Hold down the right arrow for 3 seconds (until flashing). Use the up/down arrows to set 27c. The thermostat will now maintain a base temperature of 26-27c, with an overrun to 28.7c. Grow smarter with the growbuddie40. Experience a compact, efficient, and fully controlled growing environment.

Whether you're incubating cultures or fruiting mushrooms, the growbuddie40 provides optimal conditions for success. Plug in, stack up, and start growing. This item is made of polypropolene.
Mushroom Heating and Incubation Chamber Growbuddie40    Mushroom Heating and Incubation Chamber Growbuddie40