Six Aquaponics Fail Safe 12 Bell Siphon Kits, IBC Grow Bed W 1 Clear Top Bell, Save 30.00

  

This listing is for a set of 6 siphon kits with 5 normal bell tops (5x photo #2) and one clear top (photo #1) for watching the siphon action. This is for fun, trouble shooting, education, etc. You save 30.00 on this set over purchasing each separately. This size is intended for an ibc grow bed (15 square feet) but will probably work on a gb twice that size.

Water depth can be adjusted from 11" to 13" on this model within seconds. If you need one for your barrel size system, etc. Just click on my store icon above and check out the smaller sizes we list there. We realize that many of you can make your own but it does take the right tools and pipe, etc which can really add up.

Unless you are going to need 10 or more like we did, it may not pay to make your own. What you get is listed below x 6 and one bell has our clear cover. It only takes seconds to switch the clear bell with another bell so you can use the clear top on any bed at any time you like.

If you want all the bells with clear covers please write us for a price. One 4" pvc gravel shield 14" tall. One 3" pvc bell x 12" high with cap and pull handle, (looks very cool). One pair male and female threaded adapter with "o"ring to match for the bulkhead adapter.

Two 7" and one 4" pieces of 1 pvc pipe. One 1" to 2" adapter for "bernoulli effect". Three extension rings for instantly changing water height for seeds, seedlings or flooding the bed to level media, drive out cutworms, slugs, etc.

Basically what you see in the first 2 photos above with one clear top (photo 0ne) and 5 classic top siphons (photo two). These are ready to go. All you do is slip them together and install them in your grow beds. Cement not included and not necessary until it is "dialed in" the worst thing you can do is to glue things before they are all tested and ready to go permanent. Take my word for that:- the first 2 that i made were about an inch too high for the 12 of gravel i planned to use.

Having glued it up i had to remove the gravel and all just to shorten the down tube. There is really no need to glue any of the parts located above the bulkhead fittings, just below.

I have glued the top cap on the bell and the 2 pieces that form the funnel. I will also include 3 sizes of extensions so you can flood the bed, start seeds, or start seedlings.

Once the plants have strong deep roots you simply remove the extension ring and watch your garden grow. Check out our new fb page under smoky mountain aquaponics to learn more about our system. This is the most fun we have ever had gardening and delicious fish to boot not to mention year round share your system pics at our fb page as well.

Thanks for looking and feel free to ask questions even related to your system design. Smoky mountain aquaponics is here to help you achieve your dream system. This item is made of pvc.